GeoBox® | Edge Blending, Projection Mapping, Warping, Video Wall & 3D Processors
Edge Blending
Video Wall Processors
Multi-view Processors, Switchers & Splitters
3D Processors
About GeoBox Immersive Processors
GeoBox is VigilLink's line of standalone, hardware-based video processors for immersive spaces and digital signage: edge blending, projection mapping, image warping, video wall control, multi-view switching, and 3D format conversion. Every unit is a one-box solution that runs without any PC software in the signal path — geometry alignment, blending, and layouts are configured over IR remote, an RS-232/Ethernet PC tool, or a built-in WebGUI, then run continuously on dedicated hardware. The range spans compact single-channel mini processors (G111, G112) through 8-channel 4K video wall controllers (G408) and 8K2K-in edge-blending processors with an integrated multi-viewer (UD100 Series), so one technology family covers a two-projector room through a multi-projector curved installation.
Because the processing lives in dedicated, plug-and-play hardware rather than a host computer, GeoBox delivers the reliability that experiential, simulation, and command-and-control environments require, and the products are TAA compliant for government and defense use. Whether you're blending several projectors into one seamless curved image from a single box, tiling a 4K video wall without a separate splitter, converting a 3D source for passive or active displays, or warping content onto an off-axis or ultra-short-throw surface, VigilLink supplies a purpose-built GeoBox processor for the task — backed by full professional AV integration support.
Why Choose GeoBox Processors
One-box, no-software operation — geometry, blending, and video wall layouts are stored and processed in hardware and run 24/7 without a host PC, removing a common point of failure in immersive installs
Plug-and-play with flexible control — configure via IR remote, RS-232, Ethernet PC tool, or built-in WebGUI, then disconnect; multi-source I/O across HDMI 2.0, DisplayPort, and VGA on select channels
Precision geometry and warp engine — up to 120×68 grid control points (17×9 on mini units) for accurate alignment on flat, curved, corner, and off-axis surfaces, with black-level uplift and independent RGB gamma at every edge
Embedded video wall function — no external splitter — image splitting, cropping, overlap-pixel setting, and aspect ratio adjustment are built in, with 4K loop-out ports for daisy-chaining larger arrays
Full processing range in one family — edge blending, projection mapping, warping, video wall, multi-view, and 3D conversion from FHD through 4K@60 4:4:4 and 8K2K-in tiers
TAA compliant, hardware-reliable design — built for non-stop museum, simulation, military, and control-room operation
Choosing the Right GeoBox Processor
GeoBox is organized into six families. Select by the visual outcome you need, then by channel count and resolution tier.
Edge Blending (UD100 Series, M810 Series, G112, G812, G814): Blends multiple projectors into one seamless image with per-edge gamma and black-level correction. The UD100 Series handles 8K2K-in / 4K2K-out with an integrated multi-viewer; the M810 Series is a modular 4K-in / 2K-out blender with PIP & POP; G112 is a 1-channel mini; G812 (2-channel) and G814 (4-channel) take 4K2K in and output 2048×1080, with the G812 adding 3D demultiplexing and warping. Choose for curved screens, domes, and multi-projector walls.
Projection Mapping (M800EX Series): A modular 4K-in / 2K-out edge blending and projection mapping processor with 2× HDMI, 1× DP, and 1× VGA input per channel, for mapping content onto irregular and architectural surfaces. Choose when the target is not a flat rectangle.
Image Warping (UD101L, M811L, G111): Single-channel warping for geometry correction, rotation, cropping, and stacking on off-axis and ultra-short-throw projectors. UD101L is 8K2K-in / 4K2K-out with multi-view; M811L is 4K2K-in / 2048×1080-out with PIP/POP; G111 is a compact mini. Choose for single-projector distortion correction and portrait installs.
Video Wall Processors (G406, G406Lite, G406S, G408, G413, G902, G904): 2-, 4-, and 8-channel 4K in/out controllers with embedded splitting, cropping, rotation, and scaling — no external splitter. G406 adds a 2×4 matrix switch; G408 drives 8 channels with independent per-output geometry; G413 is a creative (offset/rotated) wall controller with PIP/POP; G902 (2-ch) and G904 (4-ch) take 8K in and output 4K with a multi-viewer. Choose for control-room, retail, and creative walls.
Multi-View Switchers & Splitters (S901, S902, G901, S914): Seamless 4K switching with quad-view output. S901 is a 5×1 seamless switcher (3× HDMI + 2× DP in, 1× HDMI out); S902 is a 4×2 UHD quad-view processor with seamless switcher; G901 adds active 3D format conversion; S914 is a 4K/60 1×4 HDMI distribution splitter with intelligent EDID. Choose for monitoring walls and multi-source rooms.
3D Processors (G901, G902, G812): Active and passive 3D handling — G901 converts a 3D input to side-by-side, top/bottom, or frame-sequential output; G902 is a 4K 3D demultiplexer; G812 combines 3D demultiplexing with warping. These units live in their primary subcategories and are cross-listed here.
GeoBox Selection Guide
Filter the full GeoBox range by category or capability to find the right processor. All models are standalone, one-box, and TAA compliant.
Showing 20 of 20 products
| Product | Category | Channels | In → Out | Multi-Viewer | 3D | Best for |
|---|---|---|---|---|---|---|
| UD100 Series | Edge Blending | 1–4 | 8K2K → 4K2K | Yes | — | Highest-res multi-projector blending with monitoring |
| M810 Series | Edge Blending | Modular | 4K → 2K | — | — | Modular multi-source blending; simulation & classrooms |
| G112 | Edge Blending | 1 | 4K in (mini) | — | — | Compact single-projector blend |
| G812 | Edge Blending | 2 | 4K2K → 2048×1080 | — | Demux + warp | 2-projector blend with 3D and warping |
| G814 | Edge Blending | 4 | 4K2K → 2048×1080 | — | — | 4-projector seamless blending |
| M800EX Series | Projection Mapping | Modular | 4K → 2K | — | — | Mapping onto irregular & architectural surfaces |
| UD101L | Image Warping | 1 | 8K2K → 4K2K | Yes | — | 8K single-projector warping with monitoring |
| M811L | Image Warping | 1 | 4K2K → 2048×1080 | — | — | 4K warping with PIP/POP, rotation & cropping |
| G111 | Image Warping | 1 | 4K in (mini) | — | — | Compact single-projector geometry correction |
| G413 | Video Wall | 4 | 8K1K@30 / 4K2K@60 in | — | — | Creative, angled & irregular walls |
| G408 | Video Wall | 8 | 4K → 4K/2K | — | — | Large walls up to 16 monitors (cascade) |
| G904 | Video Wall | 4 | 8K → 4K | Yes | — | 4-screen 8K-in wall with monitoring |
| G406 | Video Wall | 4 | 4K → 4K | — | — | 4-screen wall with 2×4 matrix switch |
| G406Lite | Video Wall | 4 | 4K → 4K/2K | — | — | Simple true-4K four-monitor wall |
| G902 | Video Wall | 2 | 8K → 4K | Yes | Demux | 2-screen 8K-in wall with 3D demux |
| G406S | Video Wall | 2 | 4K → 4K | — | — | Entry-level 2-screen wall |
| S901 | Multi-View | 5×1 | 5 in → 1 out | Quad view | — | Quad view + seamless switch; DP inputs |
| S902 | Multi-View | 4×2 | 4 in → 2 out | Quad view | — | Quad view with two independent outputs |
| G901 | Multi-View | 5×1 | 5 in → 1 out | Quad view | Format conv. | Quad view + seamless switch + 3D conversion |
| S914 | Multi-View | 1×4 | 1 in → 4 out | — | — | 1→4 HDMI distribution with EDID management |
Ideal Applications
Museums & Experiential / Immersive Installations
Edge blending and warping processors (UD100 Series, G814, M810 Series) drive multi-projector curved and domed surfaces from standalone hardware, combining blending, 3D, and multi-viewers in an exhibit system that runs unattended.
Simulation & Training
PC-independent operation and TAA compliance make the M810 and UD100 Series suited to flight, driving, and military simulation, where resolution is enhanced by blending multiple sources and 24/7 reliability is mandatory.
Houses of Worship & Large-Venue Projection Mapping
M800EX and G800-series processors blend and map content across wide, curved, and architectural surfaces, letting one operator drive several projectors as a single image via remote or WebGUI.
Control Rooms & Command Centers
G406 / G406S / G408 and G902 / G904 video wall controllers tile 4K and 8K-in sources across large arrays with embedded splitting and cropping, while multi-view switchers place several feeds on one operator monitor.
Broadcast, Esports & Multi-View Monitoring
S901, S902, and G901 seamless 4K switchers with quad view and active 3D conversion combine multiple HDMI and DisplayPort sources into one monitoring output, with sequential 3D out for specialized displays.
Frequently Asked Questions
What is a GeoBox processor?
A GeoBox processor is a standalone, hardware-based video processor for immersive display and digital signage — handling edge blending, projection mapping, image warping, video wall control, multi-view switching, or 3D format conversion. It runs as a one-box solution with no PC software in the signal path, configured by IR remote, RS-232/Ethernet PC tool, or built-in WebGUI.
What is the difference between edge blending, projection mapping, and warping?
Edge blending overlaps multiple projectors into one seamless image, correcting the overlap with gamma and black-level adjustment. Projection mapping fits an image to an irregular or architectural surface. Warping corrects geometric distortion on a single projector, such as an off-axis or ultra-short-throw setup. Many GeoBox units perform more than one of these.
Do GeoBox processors need a PC or software to run?
No. All processing and settings run in dedicated hardware, so the unit operates continuously without a host computer or resident software. A PC or WebGUI is used only for initial setup, then can be disconnected — which is why GeoBox suits 24/7 museum, simulation, and command-and-control installations.
How many projectors can one unit blend?
A single GeoBox edge blending processor can blend up to four projectors into one seamless curved image, and units can be linked via 4K loop-out ports to drive additional projectors. Channel count varies by model — the G812 is 2-channel and the G814 is 4-channel.
Are GeoBox products TAA compliant?
Yes. GeoBox products are TAA compliant and are used in government, defense, and simulation environments. Their standalone, hardware-based design is intended for reliability in sensitive and mission-critical operations.
What resolutions do GeoBox processors support?
Support ranges by tier: mini units (G111, G112) handle up to 4K@30Hz; 4K blending processors (G812, G814) take 4K2K in and output 2048×1080; and the UD100 Series and UD101L accept 8K2K in (up to 7680×2160 @30Hz / 7680×1200 @60Hz, 4:4:4) with 4K2K out. Video wall controllers G902 and G904 take 8K in and output 4K.
Do I need a separate splitter for a video wall?
No. GeoBox controllers include an embedded video wall function that handles image splitting, cropping, overlap-pixel setting, rotation, scaling, and aspect ratio internally, so no external splitter or PC software is required. Loop-out ports allow daisy-chaining for larger walls.
Can GeoBox convert 3D signals?
Yes. 3D-capable models convert a 3D input into side-by-side, top/bottom, or frame-sequential output for passive and active 3D displays. The G901 adds active 3D format conversion with sequential 3D out, the G902 is a 4K 3D demultiplexer, and the G812 combines 3D demultiplexing with warping.