Home > GeoBox Immersive Spaces > Edge Blending > G814
4 Channel 4k2k in / 2048x1080 (FHD) out Edge Blending Processor
G814
Four-channel edge blending drives four projectors from a single unit (two G812 modules in one chassis)
Accepts 4K2K input (4096×2160@60Hz, 4:4:4) across 8 inputs, with four HDMI outputs up to 2048×1080@60Hz
17×9 geometry control points with 120×68 pixel fine-tune for curved and corner-wall screens
Embedded video wall and dual HDMI 2.0b loop-out for daisy-chaining, no external splitter required
Downloads
Product Description
G814: Four-Channel Curved-Screen Edge Blending Processor
The G812 is a quad-channel curved-screen edge blending processor for image warping, stacking, and projection mapping. It accepts up to 4096×2160@60Hz input with 4:4:4 color and drives two projectors from a single unit, with a built-in 3D demultiplexer that decodes side-by-side and top/bottom 3D into separate left/right eye frames for passive 3D display.
Four-channel edge blending drives four projectors from a single unit
4096×2160@60Hz 4:4:4 input, 2048×1080@60Hz output
17×9 geometry control points with 120×68 pixel fine-tune for curved-screen warping
Built-in 3D demultiplexer for passive 3D display
Embedded video wall, no external splitter required
HDMI 2.0b loop-out for daisy-chaining cascaded units
Configure via IR remote, WebGUI, USB, or Ethernet
Inputs and Outputs
Inputs: 8 total (4x HDMI, 2x DP, 2x VGA)
Outputs: 4x HDMI
Input Resolution: Up to 7680x1200 @30Hz and 4096x2160 @60Hz with 4:4:4 color sampling
Output Resolution: Up to 2048x1080 @60Hz
Processor: 10-bit high-end processor with motion adaptive de-interlace
Compatibility: Supports non-VESA standard input timing
Warp and Geometry Alignment
17×9 geometry control points with 120×68 pixel-position fine-tune
1/4-pixel adjustment step, up to 100 adjusting points
Linearity Grid Line adjustment for quick H/V line alignment
"W"-type Corner Wall adjustment for 90° corners and square pillars, up to 1200 pixels
Four-corner alignment, keystone, pincushion/barrel correction, and 90/180/270 rotation and flip
Real-time adjustment via IR remote, WebGUI, USB, or Ethernet
Edge Blending and Color
Four-direction edge blending up to 1920 (H) / 1200 (V) overlap pixels for flat, curved, and cylindrical screens
Independent RGB gamma correction for edge-blend color fine-tuning
Individual color and white-balance correction per output
9-region black-level uplift to compensate for projector light leakage
Video Wall and Multi-Projector
Embedded video wall crops, allocates, and sets overlap pixels per projector, with no external splitter required
Serves as a video wall controller for up to a 15×15 matrix from a single source
HDMI loop-out cascades multiple units for larger arrays
3D and Processing
3D demultiplexer decodes side-by-side and top/bottom 3D input to RH/LH eye frames for passive 3D display
10-bit processor with 3D motion-adaptive de-interlacing, low-angle smoothing, and 3:2/2:2 pull-down
xvYCC and 8/10/12-bit deep color processing
Control and Power
Control via front panel, IR, RS-232, USB, and Ethernet, including Wi-Fi through PC, mobile, or tablet
Saves up to 5 recallable presets; settings back up to PC or USB and copy between units
Dual power: AC 100–240V or DC 12V/2A; AC mode provides one DC 12V/1A output for a signal extender
Specifications
Input:
2x HDMI 2.0b
1x DP1.2a
1x VGA
HDCP:
HDMI V2.2/V1.4 for G812
DP: HDCP: V1.3 for G812
Input Resolution:
4096x2160 @60Hz
7680x1200 @30Hz
Support:
Non-VESA Standard Input Timings
Output:
4x HDMI, Up to 2048x1080 @60Hz & WUXGA
Signal:
10 bits, 4:4:4 Chroma Sampling
Input Supports RGB/YUV Progressive and Interlaced Signals
Output is Progressive RGB
Loop Out:
2x HDMI Loop Out Ports
Geometry Alignment:
Up to 17x9 Control Points (IR Control and GCT PC Tool)
120x68 Grid Pixel Position Fine-Tune
1/4 Pixel/Step Adjustment Range
Maximum Adjusting Points: 100 Points
Geometry Adjustment Range: Up to 600 Pixels in Both H&V Directions
Latency:
Two Frame Latency: 33ms (at V=60Hz)
Edge Blending:
At 4 Edges Up to H=1920 Pixels, V=1200 Pixels
Independent RGB Gamma Correction
9 Area Black Level Uplift
Corner Wall Adjustment:
"W" Type Corner Wall Adjustment
Adjustment Range: 1200 Pixels in 4 Corners, Horizontal/Vertical, and Curve Points
Linearity Grid Line Adjustment:
Quick H&V Line Position Alignment via Remote Controller
Edge Mask:
Up to 500 Pixels Following the Result of Geometry Alignment
Up to 900 Pixels in H&V Directions Through 8 Control Points Around Image Border
Video Wall Function:
Image Split, Cropping, and Overlap Pixel Setting
Preset Output Resolution:
Up to 2048x1080 @60Hz
Support Refresh Rate: 24/30/50/60/120 in Some Output Timings
Color Processing:
Input Support xvYCC & 8/10/12-Bit Deep Color Processing
Individual Color and White Balance Adjustment in Each Output Channel
Rotation & Flip:
Individual 90/180/270 Rotation, Flip, Cropping, Scaling, and Color Adjustment in Each Channel
90/270 Degrees Rotation and Flip Only Available Under 4K/30Hz Input Resolution
Audio Outputs:
Embedded HDMI & SPDIF Audio Outputs
EDID:
Selectable and Programmable EDID in the Range: H=1024-3840, V=720-2400
ESD Protection:
±8kV (Air-Gap Discharge)
±4kV (Contact Discharge)
Power Supply:
Dual Power Supply in G810
AC 100-240V or DC 12V Power Supply
DC 12V 1A Output for Signal Extender (AC Power Supply)
Power Consumption (Without DC12V/1A Output):
AC240V 0.139A/33.4W, AC110V: 0.295A/32.5W
Power Consumption (With DC12V/1A Output):
AC240V: 0.139A/33.4W, AC110V: 0.295A/32.5W
Working Environment:
Up to 45°C, 10-90% Relative Humidity
Control:
IR, RS232, WebGUI & PC Tool for USB & Ethernet
Dimensions (Body Only):
17.32" x 6.77" x 2.28"
Weight (Body Only):
5.42 lbs
Certifications:
CE/FCC/RoHS Certified