Auto-Switching Wall Plates | HDBaseT, USB-C, HDMI, MiniDP, VGA, Dante®
HDBaseT Wall Plates with Bundled Receiver (Rx)
HDBaseT Wall Plates & Receivers (Sold Separately)
About Auto-Switching Wall Plates
VigilLink's Auto-Switching Wall Plate range delivers professional AV connectivity at the presentation point — the lectern, table, or wall outlet where sources connect — with auto-input detection that eliminates manual switching and simplifies user experience in any room. The line spans HDBaseT 2.0 transmitter/receiver systems that extend 4K@60Hz 4:4:4 18Gbps signals up to 150 meters over a single Cat6 cable, multi-input models accepting USB-C, HDMI 2.0, MiniDP, and VGA from any laptop or device type, and Dante® audio converter wall plates that bring professional networked audio directly to the installation point without rack equipment.
HDBaseT wall plates are available in two purchasing configurations. Bundled transmitter-with-receiver kits simplify procurement for single-point-to-single-display installs, while individually sold transmitters and receivers give AV integrators the flexibility to match wall plate transmitters to their choice of compatible HDBaseT receiver or matrix switch. Dante® wall plate models cover XLR, analog RCA/3.5mm, and Bluetooth audio sources — converting room audio directly into the Dante® IP network from a standard US gang box without separate rack hardware.
Why Choose VigilLink Auto-Switching Wall Plates
Auto-input switching with no user interaction required — wall plate transmitters automatically detect and switch to an active source, eliminating AV system buttons, displays, and AV-assistant intervention in meeting rooms and classrooms
4K@60Hz 4:4:4 18Gbps full bandwidth over Cat6 — HDBaseT 2.0 transmission preserves full HDMI 2.0 signal quality at distances from 40m to 150m over a single Cat6/6A cable run
Multi-source input flexibility — models accept USB-C (with charging), HDMI 2.0, MiniDP, and VGA from any laptop or source device, with automatic priority switching between connected inputs
POC (Power over Cable) eliminates separate receiver power supplies — select models power the remote HDBaseT receiver from the wall plate transmitter over the same Cat cable, simplifying installation
USB 2.0 and RS-232 extension alongside video — USB 2.0 pass-through supports KVM, touch screen, and peripheral extension; RS-232 carries control signals from control systems to the display
Dante® audio at the wall — Dante® wall plate models convert XLR, analog, RCA/3.5mm, and Bluetooth audio directly into a Dante® IP network from a standard gang box, avoiding rack-mount audio bridges entirely
6-year warranty across the product line — VigilLink's industry-leading 6-year warranty covers every wall plate and receiver in this range
Choosing the Right Wall Plate
HDBaseT Wall Plates with Bundled Receiver (VLWP-UHU-TR / VLWP-UHS-TR / VLWP-UHC-TR / VLWP-UHCI150-TR / VLWP-DHU-TR / VLWP-DHS-TR / VLWP-DHC-TR): Complete transmitter-plus-receiver kits for straightforward single-drop installs. USB-C/HDMI 2.0 models (UHU, UHS, UHC) accept USB-C and HDMI 2.0 inputs; MiniDP/HDMI 2.0 models (DHU, DHS, DHC) accept MiniDP and HDMI 2.0. Control add-ons distinguish the U/C/S suffix: USB 2.0 (U), POC-only (C), or RS-232 (S). The VLWP-UHCI150-TR extends to 150m versus 40m for all other bundled models. Choose bundled kits when one wall plate connects to one fixed display location and receiver procurement simplicity matters.
HDBaseT Wall Plates & Receivers Sold Separately (VLWP-2HVG-TX / VLWP-2HVG-RX / VLWP-HD70-TX / VLWP-HD70-RX): Individual transmitters and receivers for integrators who pair wall plates with matrix switchers, multi-display systems, or alternate HDBaseT receivers. The VLWP-2HVG-TX accepts VGA/HDMI 2.0 with USB 2.0 and POC — ideal for rooms needing legacy VGA support. The VLWP-HD70-TX is a single-input HDMI 2.0 wall plate with POC. Choose sold-separately models when a matrix switcher or multi-zone system requires a transmitter-only wall plate.
Dante® Wall Plate Audio Converters (VLDT-WP22B2AUS / VLDT-XL22WPUS / VLDT-BT2WPUS): In-wall audio-to-Dante® converters installed directly in a US 2-gang or 1-gang box. The VLDT-WP22B2AUS handles Bluetooth and analog RCA/3.5mm audio in a 2-gang form factor. The VLDT-XL22WPUS provides 2-in/2-out XLR analog-to-Dante® conversion in a 2-gang plate. The VLDT-BT2WPUS is a compact 1-gang Bluetooth-over-Dante® converter. Choose Dante® wall plates when a room requires networked audio integration at the source point without rack-mount Dante® bridge hardware.
Ideal Applications
Corporate Conference Rooms & Boardrooms
Multi-input HDBaseT wall plates (VLWP-UHU-TR, VLWP-UHS-TR) installed at the conference table accept any laptop over USB-C or HDMI 2.0, automatically switching to the active presenter's device. POC powers the display-side receiver from the table outlet, eliminating a power supply at the display location. RS-232 variants extend room control system commands from the DSP or control processor at the display end back to the room controller, enabling single-cable AV and control infrastructure for every seat position.
Higher Education Classrooms & Lecture Halls
Classrooms require wall plates that accept every laptop type without adapters. USB-C and HDMI 2.0 auto-switching models (VLWP-UHC-TR) handle MacBooks, Windows ultrabooks, and Chromebooks on a single plate, while the MiniDP/HDMI models (VLWP-DHU-TR, VLWP-DHC-TR) serve engineering labs and workstations with Mini DisplayPort outputs. The VLWP-UHCI150-TR extends 4K@60Hz to 150m for large lecture theaters where the display or projector is far from the presenter position.
Large Venues & Hospitality AV
For hotel ballrooms, convention centers, and large meeting spaces where displays are located 40–150m from the presentation point, HDBaseT wall plates transmit 4K@60Hz over a single Cat6 run to any HDBaseT-compatible display or matrix receiver. Sold-separately transmitters (VLWP-HD70-TX) pair with matrix systems to enable flexible room-combination AV without re-cabling.
Professional Audio Installations — Dante® Wall Plates
Dante® wall plate converters eliminate rack-mount audio bridges in rooms that need Dante® networked audio at the connection point. The VLDT-XL22WPUS installs in a standard gang box to bring XLR microphone or line-level sources directly onto the Dante® network. The VLDT-WP22B2AUS provides Bluetooth wireless audio input alongside analog sources — ideal for conference rooms, training spaces, and hospitality environments requiring flexible presenter audio pickup without visible cable infrastructure.
Frequently Asked Questions
What is an auto-switching wall plate and how does it work?
An auto-switching wall plate is a wall-mounted AV transmitter that detects which input has an active signal and automatically routes it to the connected display or HDBaseT receiver — no button press or manual selection required. When a presenter connects a laptop via USB-C and another laptop is already connected via HDMI, the wall plate detects the new active source and switches automatically. This eliminates the need for visible switchers or control panels in rooms and is the standard approach for BYOD meeting rooms and classrooms.
What resolution and bandwidth do VigilLink HDBaseT wall plates support?
All VigilLink HDBaseT wall plate models support 4K@60Hz 4:4:4 at 18Gbps via HDBaseT 2.0 — full HDMI 2.0 bandwidth. This supports HDR10, HDCP 2.2, and Deep Color. The VLWP-UHCI150-TR extends this bandwidth to 150 meters; other models support up to 40 meters over Cat6/6A.
What is the difference between bundled-Rx and sold-separately wall plate models?
Bundled-Rx models include both the wall plate transmitter and a compatible HDBaseT receiver in the same package — the complete transmitter-to-display link is covered in one SKU, which simplifies procurement for single-point installs. Sold-separately transmitters and receivers are purchased independently, allowing integrators to pair wall plate transmitters with matrix switches, alternate receivers, or multi-room AV systems where a receiver is already present or where a different endpoint is required.
Does USB-C charging work on the USB-C input models?
Yes. USB-C input models such as the VLWP-UHC-TR and VLWP-UHCI150-TR provide USB-C charging capability alongside video signal passthrough. Laptops, tablets, and other USB-C devices receive power while presenting, eliminating the need for a separate charger at the table or lectern.
What does POC (Power over Cable) mean on wall plate models?
POC (Power over Cable) means the wall plate transmitter sends power to the paired HDBaseT receiver over the same Cat6 cable used for video and audio — eliminating the need for a separate power supply or outlet at the display location. This simplifies installation significantly, particularly for ceiling-mounted displays or projectors where running a power cable alongside the Cat6 is impractical.
Can VigilLink HDBaseT wall plates integrate with third-party HDBaseT matrix switchers?
Yes. Sold-separately transmitter models (VLWP-HD70-TX, VLWP-2HVG-TX) are designed to pair with HDBaseT 2.0-compatible matrix switchers and receivers from VigilLink and other manufacturers. These models transmit a standard HDBaseT 2.0 signal. Bundled-Rx models are optimized and tested as matched pairs; using their transmitter with a third-party receiver may work but is not guaranteed.
What Dante® wall plate models are available and what audio sources do they support?
Three Dante® wall plate models are available. The VLDT-XL22WPUS provides 2-in/2-out XLR analog-to-Dante® conversion in a US 2-gang plate for microphone and line-level sources. The VLDT-WP22B2AUS converts Bluetooth and analog RCA/3.5mm audio to Dante® in a 2-gang plate. The VLDT-BT2WPUS is a compact 1-gang Bluetooth-over-Dante® converter. All three require PoE from the network switch for power — no separate power supply needed.
What cabling is required for HDBaseT wall plate installations?
All VigilLink HDBaseT wall plate models require Cat6 or Cat6A cable (Cat5e for short-distance runs). A single Cat6 run from the wall plate transmitter to the HDBaseT receiver carries video, audio, control (RS-232 or USB), and power (POC) simultaneously. For 150m runs (VLWP-UHCI150-TR), Cat6A is recommended for reliable signal integrity at maximum distance.