Home > GeoBox Immersive Spaces > Image Warping > UD101L

1 Channel 8k2k in / 4k2k out Warping Processor with Multi-view

UD101L

  • Single-channel warping processor with quad-split multi-viewer, PIP/POP, image rotation, and cropping

  • Accepts up to 8K2K input (7680×2160@30Hz HDMI, 7680×4320@30Hz DP) with true 4K output (4096×2160@60Hz 4:4:4)

  • 120×68 geometry control points with "W"-type corner-wall adjustment for curved, corner, and pillar screens

  • 3D format conversion plus HDMI 2.0b loop-out for audio and multi-unit daisy-chaining

Where to Buy
GeoBox 30 Months Warranty Seal

Downloads

DATA SHEET (PDF)
USER MANUAL (PDF)

Product Description

The UD101L is a 1-channel 8K2K-in / true-4K-out warping processor with quad-split multi-viewer, PIP/POP, 120×68 geometry warp, 3D conversion, and HDMI loop-out.

Features:

  • Curved Screen Projection – Create an immersive 4K curved display for golf simulators and large-scale gaming.

  • Aspect Ratio Adjustment – Effortlessly modify your screen’s aspect ratio to match your desired display size.

  • Mobile Device Mirroring – Mirror your phone or tablet onto a 4K portrait monitor for gaming or commercial displays.

  • Picture-in-Picture (PIP) & Picture-outside-Picture (POP) – Add a second video source with adjustable size, aspect ratio, and positioning.

  • Quad-Split Multi-Viewer – Display up to four sources simultaneously on a single 4K screen.

  • Custom Image Cropping – Crop any section of an image to create the perfect display.

  • Image Rotation – Rotate images for portrait displays without modifying the source.

  • Ultra-Short Throw Projector Correction – Eliminate image distortion for seamless projection.

  • Edge Masking – Remove unwanted visuals at the display edges for a cleaner look.

  • 90° Wall Projection – Achieve seamless projection on corner walls using "V" type corner wall adjustment.

  • Square Pillar Display – Perfectly map images on 90° wall corners with pillars using "W" type corner wall adjustment.

  • Stacked Projector Brightness Boost – Combine multiple projectors for a brighter, more vibrant image.

  • 3D Format Conversion – Seamlessly convert 3D content for medical device applications.

Our solution is built for performance, flexibility, and innovation—enhancing how you experience visuals. Discover the difference today!

Specifications

Input/Output:

  • Input: 3x HDMI 2.0b, 1x DP1.4

  • Output: 1x HDMI 2.0, loop output: 1x HDMI 2.0b for audio and daisy chain connection

  • Input seamless switcher function can be selected

  • HDCP compliance: Input: HDMI: HDCP V2.2/V1.4, DP: HDCP: V1.3, Output: HDCP V2.0/V1.4

Resolution:

  • Input resolution:

    • DisplayPort: 7680x4320 @30Hz

    • HDMI: 7680x2160 @30Hz, 7680x1200 @60Hz, 4096x2400 @50Hz, 4096x2160 @60Hz

  • Input supports progressive and interlaced RGB/YUV signal, 4:4:4 Chroma sampling, up to 30 Color bits

  • 16 selectable Outputs: HDMI 2.0 up to 4096x2160 @60Hz, progressive 4:4:4 RGB

Geometry Adjustment:

  • Warp engine for geometry alignment up to 120x68 control points

  • Maximum geometry adjustment up to 1200 pixels in both H&V directions for each corner

  • Support W shape Corner Wall adjustment in H&V at flexible location

  • Support Linearity Grid Line adjustment for quick H&V line position alignment. It is good for the line gap adjustment on curved screen display.

  • Edge Mask with 8 control points up to 900 pixels at each control point in H&V directions

  • Selectable geometry alignment grid size from 8-120 pixels in H&V direction. Default is 32x32 pixels.

Video Processing:

  • Embedded video wall function for image split, cropping and aspect ratio adjustment

  • 3D format conversion: Convert 3D input signal into Side by Side, Top/Bottom and frame sequential output signal for passive 3D and active 3D displays

  • 10-bit processor, 3:2/2:2 cadence, low angle smooth algorithm, high-quality scaling engine

  • 3D motion adaptive de-interlace

  • Frame lock function to get perfectly synchronized outputs in multi-unit application

  • Frame rate conversion and 50Hz in/out function to eliminate image frame drop or repeat

  • Support xvYCC & 8/10/12-bit deep color processing

  • Automatically support HDR 10 input signal processing with SDR full color RGB 4:4:4 output

OSD/Display:

  • OSD menu location is adjustable

  • PIP/POP function with PIP image size from 320x180 up to 1920x1200 resolution with flexible position and adjustable aspect ratio

  • 2/3/4 split view

Other Features:

  • Quick seamless swap between two input signals

  • Selectable and programmable EDID in the range: H=1024-4080, V=720-3840

  • User can save up to 10 settings that can be recalled at any time

  • ESD Protection: ±15kV (Air-gap discharge), ±8kV (Contact discharge)

  • Control: IR, RS232, USB, Ethernet

Certification: CE/FCC/RoHS Certified

Power:

  • Power supply: DC 12V 2A

  • Power consumption: DC 12V/1.1A (13.2W)

Dimensions and Weight:

  • Dimensions (Body Only): 11.93in x 7.48in x 1.57in

  • Weight (Body Only): 2.65lbs

More Product Information