Home > GeoBox Immersive Spaces > Video Wall Processors > G406S
2 Channel 4K in/out Video Wall Controller
G406S
Two-output 4K/2K video wall controller splitting one HDMI source across two monitors
Accepts up to true 4K (4096×2160@60Hz) or 8K1K@30Hz input, with two HDMI outputs up to 2048×1080@60Hz
Per-channel rotation, cropping, and pixel-based bezel compensation (±1800px) for landscape or portrait pairs
HDMI 2.0 loop-out for cascading, including pairing with the G408 for larger walls
Downloads
Product Description
G406S: Two-Channel 4K/2K Video Wall Controller
The G406S is a pure-hardware video wall controller that splits a single HDMI source across two monitors in landscape or portrait orientation. It accepts up to true 4K or 8K1K@30Hz input and outputs up to 2048×1080@60Hz per channel with pixel-to-pixel display. Multiple units cascade for larger walls, and it pairs with the G408 to extend into higher screen counts.
Splits one HDMI source across two monitors in landscape or portrait
Up to true 4K or 8K1K@30Hz input, output up to 2048×1080@60Hz
Per-channel rotation, cropping, and ±1800px bezel compensation
HDMI 2.0 loop-out for cascade, pairs with the G408 for larger walls
HDR input processing with 4:4:4 RGB SDR output
Frame-lock synchronization across multiple units
Setup via IR remote, USB, RS-232, or Ethernet, no PC required
Inputs and Outputs
1× HDMI 2.0b input, up to 4096×2160@60Hz or 7680×1200@30Hz, 4:4:4
2× HDMI outputs, up to 2048×1080@60Hz, RGB 4:4:4 progressive
1× HDMI 2.0 loop-out for multi-unit cascade and daisy-chaining
HDCP 2.2/1.4
Video Wall and Image Adjustment
Pixel-based position alignment up to ±1800 pixels for bezel compensation and misalignment correction
Overlap output for projector edge-blending with adjustable overlap pixels
Independent 90/180/270 rotation, flip, cropping, scaling, and color adjustment per channel
Flexible aspect ratio adjustment per edge for landscape and portrait arrays
Processing and Color
10-bit processor with 3:2/2:2 cadence, low-angle smoothing, and high-quality scaling
3D motion-adaptive de-interlacing and frame-rate conversion
50Hz in/out to avoid video artifacts
Frame-lock for synchronized outputs across units
HDR input (SMPTE ST-2084, ST-2086), output as full-color 4:4:4 RGB SDR
sRGB and xvYCC color processing, 8/10-bit deep color
Embedded HDMI audio per output
Selectable, programmable EDID
Control and Power
Control via IR remote, RS-232, USB, and Ethernet
Standalone hardware, no PC or software required
DC 12V power, 45°C-rated for 24/7 operation
Specifications
Input:
Input Port: 1x HDMI 2.0b
Max Input Resolution: 4096x2160 @60Hz & 7680x1200 @30Hz
Support non-VESA STD input timings
4:4:4 Chroma Sampling, 30 Color bits
Output:
Output Port: 2x HDMI up to 2048x1080 @60Hz, RGB 4:4:4 progressive
1x HDMI 2.0 loop out port for multiple unit cascade & daisy chain connection
HDCP V2.2/V1.4 compliant
Support sRGB & xvYCC color processing & 8/10-bit deep color output
3:2/2:2 cadence, low angle smooth algorithm, high-quality scaling engine
Flexible aspect ratio adjustment in each edge up to ± 1800 pixels
50Hz in/out to avoid video artifact
Frame lock for synchronized outputs
Support High Dynamic Range (HDR) input signal: SMPTE ST-2084, SMPTE ST-2086
Output with SDR full-color RGB 4:4:4 progressive signal
Embedded HDMI audio in each output
Selectable and programmable EDID
Individual 90/180/270 rotation, flip, cropping, scaling & color adjustment in each channel up to 4k/30Hz input
Other Specifications:
10-bit processor, frame rate conversion
3D motion adaptive de-interlace
ESD Protection: ±15kV (Air-gap discharge), ±8kV (Contact discharge)
DC 12V/1.1A, max. 8w, (100-240 VAC PSU)
Working environment: 45 degrees C, 10-90% RH
Control: IR, RS232, USB, Ethernet
Product Dimensions: Length: 8.7 inches, Width: 6.3 inches, Height: 1.6 inches
Product Weight: 2.4 pounds
CE/FCC/RoHS/Green Certified