GeoBox G413: The Ultimate Creative Video Wall Controller

The G413 is a pure-hardware creative video wall controller that builds regular and irregular video walls through an IR remote, with no PC required to run. It supports up to 8K1K@30Hz or 4K2K@60Hz input and drives four LCDs of differing size, resolution, and bezel, installed at any angle or position. Conventional low-cost TVs and monitors can serve as display devices.

• 25 editable preset display modes

• Custom modes with LCD at any angle and position

• PIP/POP

• Multi-unit cascade

• Flexible aspect ratio and display region adjustment

• Seamless looping playback with different display modes

Inputs and Outputs

• 2× HDMI 2.0b and 1× DisplayPort 1.2a input, up to 8K1K@30Hz or 4K2K@60Hz

• 1× VGA input, up to WUXGA

• 4× HDMI 1.4 outputs for four LCDs, TVs, or monitors

• HDMI 2.0 loop-out for multi-unit cascade to larger walls, no HDMI splitter required

Creative Video Wall Setup

• 25 preset display modes selectable through the OSD, each further adjustable for bezel size and installation conditions

• Custom regular, portrait, and irregular walls by entering each monitor's corner coordinates via the Galign PC tool or remote

• Any-angle, any-position LCD mounting, with install-first then crop-per-screen workflow

• Conventional TVs usable in top/bottom or left/right flip position to balance bezel differences

Display Control

• Dynamic aspect ratio control across the entire wall, 25%-200% independently in H and V

• Any-location image cropping and flexible position adjustment

• Programmable background color for blank areas when content doesn't fill the wall

• PIP/POP across the entire video wall

Operation and Reliability

• Seamless looping playback of up to 10 display modes from one source, 1–600 second intervals, for dynamic effects

• Auto image position shift to protect LCDs from burn-in

• Adjustable OSD position

• 23 preset EDID plus programmable EDID (H: 1024–3840, V: 720–2400)

• Control via IR remote, RS-232, USB, or Ethernet

• Dual power: AC 100–240V or DC 12V, with a DC 12V/1A output to power a signal extender

• Rated for 24/7 industrial operation