Huddle Room Switchers | HDMI and USB-C Switching with USB KVM

2x1 HDMI and USB-C Huddle Room Switcher

VLPT-21HUC

2x1 Dual USB-C Huddle Room Switcher

VLPT-21UUC

About VigilLink Huddle Room Switchers

VigilLink huddle room switchers bring single-cable USB-C connectivity to small and mid-size collaboration spaces. The range spans three models: the 2x1 VLPT-21UUC with dual USB-C inputs, the 2x1 VLPT-21HUC with one HDMI and one USB-C input, and the 4x2 VLPT-42HUC with two HDMI and two USB-C inputs and dual independent outputs. All switch to HDMI at 4K@60Hz 4:4:4 and share the same core feature set: USB-C DisplayPort Alt Mode, USB Power Delivery charging, USB KVM, balanced analog audio embedding and de-embedding, dual 1G Ethernet with 802.1x and VLAN, and full control via front panel, RS-232, TCP/IP, and Web GUI.

Choosing the Right Huddle Room Switcher

VLPT-21UUC — Dual USB-C, 2x1: Two full-featured USB-C inputs to a single HDMI output, with 50W of charging per port (100W total). Built for rooms standardized entirely on USB-C laptops, where a host and a guest each dock with one cable. No HDMI input.

VLPT-21HUC — HDMI + USB-C, 2x1: One HDMI and one USB-C input to a single HDMI output, with the full 100W of charging on the single USB-C port. Built for rooms that pair a USB-C laptop with a legacy HDMI source such as a room PC or codec, and want maximum charging on the one USB-C connection.

VLPT-42HUC — Dual HDMI + Dual USB-C, 4x2: Two HDMI and two USB-C inputs routed independently to two HDMI outputs, with 50W per USB-C port (100W total). Built for larger rooms that need more sources, a second display, or independent dual-zone routing.

Key Selection Variable: Match the input mix and output count to the room. Choose the VLPT-21UUC for all-USB-C single-display rooms, the VLPT-21HUC when a legacy HDMI source shares the single display and you want 100W charging, and the VLPT-42HUC when the room needs four sources or two independently routed displays.

Frequently Asked Questions

What is a huddle room switcher?

A huddle room switcher is a compact presentation switcher for small collaboration spaces where one or two displays serve a few sources. It emphasizes table-side single-cable connection, automatic switching, and BYOD/BYOM convenience rather than the high input counts of a large presentation or matrix switcher.

Which VigilLink huddle room switcher should I choose?

Choose by input mix and output count. The VLPT-21UUC (dual USB-C, 2x1) suits all-USB-C single-display rooms. The VLPT-21HUC (HDMI plus USB-C, 2x1) suits rooms that keep a legacy HDMI source and want 100W charging on the USB-C port. The VLPT-42HUC (dual HDMI plus dual USB-C, 4x2) suits larger rooms needing four sources or two independently routed displays.

What does the USB-C input do besides carry video?

Each full-featured USB-C input carries 4K@60Hz 4:4:4 video over DisplayPort Alt Mode along with USB 3.2 Gen 1 (5Gbps) data, 1G Ethernet to the connected laptop, and USB Power Delivery charging. A presenter connects once and gets picture, shared peripherals, network access, and power over a single cable.

What is USB KVM and why does it matter in a huddle room?

USB KVM routes shared USB peripherals to whichever video source is active. A room camera, microphone, or keyboard and mouse connected to the switcher's device ports automatically follows the active source, so the same peripherals serve both an in-room PC and a BYOM laptop without re-cabling. This is what makes these switchers suitable for bring-your-own-meeting sessions on Microsoft Teams, Zoom, or Google Meet.

Do these switchers charge a connected laptop?

Yes. The VLPT-21HUC delivers up to 100W on its single USB-C port. The VLPT-21UUC and VLPT-42HUC deliver up to 50W on each USB-C port, for 100W total across their two ports. This keeps connected laptops charged throughout a meeting.

Can any of these switchers drive two displays?

Yes. The VLPT-42HUC is a 4x2 switcher with two HDMI outputs, each with an independent source selector, so the two displays can mirror one source, show two different sources, or run as separate zones. The two 2x1 models (VLPT-21HUC and VLPT-21UUC) drive a single display.

How are VigilLink huddle room switchers controlled?

Every model is managed from front-panel buttons, RS-232, TCP/IP, or a built-in Web GUI, with automatic and manual switching. Each controls the room display and external devices through CEC, IR (with an IR eye for IR learning), RS-232, LAN, and GPIO, and includes automatic display on/off.