2CH Dante ® XLR Output Adapter

VLDT-DT2XL

Data Sheet

User Manual

Product Inquiry Form

Product Description

VigilLink Dante® 2CH XLR Output Adapter

Professional Dante®-to-Analog Audio Interface with Selectable Output Gain

The VigilLink Dante® 2CH XLR Output Adapter is a compact, high-performance audio receiver that converts 2-channel Dante® digital audio into balanced or unbalanced XLR analog output—seamlessly bridging networked audio systems with traditional analog equipment.

Powered by the proven Dante® Ultimo 2x2 platform, this adapter ensures accurate, low-latency audio delivery with support for sample rates up to 96kHz and configurable output delay settings. It features five levels of analog output gain adjustment, providing precise control for line-level and consumer-level devices.

Designed for flexible deployment, the adapter supports both Power over Ethernet (PoE) and local USB-C power. Its slim profile makes it an ideal solution for commercial AV, broadcast, live events, and any environment requiring reliable Dante®-to-analog conversion in a space-saving form factor.

Featured Highlights

  • Dante ® 2CH digital audio to two-channel XLR analog audio

  • Balanced/unbalanced analog audio output

  • Dante ® audio sampling rate supports 44.1/48/88.2/96KHz@24bit

  • Analog audio input supports 5-level sensitivity adjustment (+24dBu, +4dBu, 0dBu, 0dBv, -10dBv)

  • Dante ® audio delay supports 1/2/5ms (configurable)

  • Supports local USB-C port power supply and PoE function (Class 0 802.3af PoE)

  • Compact design for easy and flexible installation

Specifications

Technical
Input     Dante® 2CH digital audio    
Output     Two-channel balanced/unbalanced XLR analog audio    
Control Method     Dante® Controller    
Video Network Bandwidth     100M    
Audio Latency     Configurable Dante® device latency

(Supports 1, 2 or 5ms configurable using Dante® Controller)    
Audio Formats     DANTE IN [Digital audio input, PCM 2CH 44.1K-96KHz 16/24bit]

XLR OUT [Analog audio output, Balanced/unbalanced 2CH, Max input level +24dBu]
Audio Parameters XLR Analog Audio Out
    Input Impedance: 600 Ohm balanced

                                  300 Ohm unbalanced

Line Input Level (Maximum): +18dBu (6.15Vrms) @balanced audio

                                                    +12dBu (3.08Vrms) @unbalanced audio

Frequency Response: 20Hz to 20kHz (-/+0.5dB)

Dynamic Range: >100dB@0dBu, 1kHzA-weighted

Audio S/N Ratio: >100dB@0dBu, 1kHzA-weighted

Audio THD+N: < 0.01% at +4dBu, 1KHz

Audio Output Sync Delay: <10ms
Transmission Distance     328ft/100m (CAT6/6A/7)
ESD Protection     IEC 61000-4-2: ±8kV (Air-gap discharge) & ±4kV (Contact discharge)
Connection    
Input ports         1x DANTE [RJ45 connector, PoE]

1x POWER [USB-C with USB power only, 12-pin female]
Output ports     2x CH1/CH2 XLR OUT [XLR female plug, with 30cm cable]
Others     1x RESET button [System reboot button]

2x GAIN knob [5-level dip switch]
Mechanical    
Housing     Plastic Enclosure    
Color     Black    
Dimensions     115mm [L] × 40mm [W] × 28mm [H]    
Weight     173g    
Power Supply     USB input: 5V/500mA

PoE input: PoE IEEE802.3af Class 0   
Power Consumption     1.25W (Max)    
Operating Temperature     0°C ~ 40°C / 32°F ~ 104°F  
Storage Temperature     -4 ~ 140°F / -20 ~ 60°C   
Operating Humidity     20 - 80% RH (relative humidity, non-condensing)
Storage Humidity     10% ~ 90% RH (relative humidity, non-condensing)

Related Products