1G 4k60 4:4:4 AVoIP Transmitter w/USB, KVM
VLIP-VGH1G-ENC
Data Sheet
User Manual
Product Description
VLIP-VGH1G-ENC, 4K UHD multi-function extension system that allows you to extend an HDMI signal along with KVM using the TCP/IP protocol over regular Cat.5e/6/7 network cable. This extender supports the transmission of Ultra High-Definition signals (up to 4K@30Hz RGB) with audio and USB up to 100m over a single cable. The transmission distance can be further extended (up to 100m per segment) by using gigabit network switches, allowing the user to cascade the system without signal loss or introducing delay.
When the extension system’s units are in multicast mode, a single transmitter’s AV signal can be sent to a large number of receivers within the same local network (unicast limits extension routing to point-to-point only). Additionally, the same multicast signal can be used to create large, multidisplay video walls with remarkable simplicity. When combined with the optional IP Master Controller, the system's functionality expands exponentially. Its centralized web-based interface greatly simplifies control and management of large distributed video matrix or video wall systems, adding to their flexibility in large home or commercial installations.
This system also features bi-directional IR and RS-232 pass-through, analog line level in/out, and a microphone input (on the receiver), providing the user with a variety of audio options. The USB functionality enables the system to function as a remote USB hub, providing a flexible remote KVM platform. Configuration information is provided via On Screen Display (OSD), and control is by WebGUI, IP Master Controller, Telnet, and front panel controls.
Featured Highlights
Video, audio and control transmission over TCP/IP in Unicast (point-to-point) or Multicast (single-to-many) modes
Support with 0°, 180°, 270° increments rotation
The analog Line In on the Transmitter sends audio directly to the analog Line Out and is inserted into the HDMI output on connected Receivers
The Mic In on the Receiver sends audio directly to the analog Line Out on the Transmitter
Both Tx and Rx may powered directly by PoE when connected to a Gigabit Ethernet switch that provides PoE (802.3af)
Supports USB keyboard, mouse and storage extension and IR ,RS-232 bypass
Unit can be controlled via WebGUI, Telnet, and front panel controls
Specifications
| TECHNICAL SPECIFICATIONS | ||
|---|---|---|
| Viedo | ||
| HDMI Compliance | 2.0 (DVI 1.0) | |
| HDCP Compliance | 2.2 | |
| Input Signal Types | 4K@60 8-bit YUV 4:2:0 | |
| Output Signal Types | 4K@60 8-bit YUV 4:2:0 | |
| Resolutions | ||
| Maximum Input | HDMI | 4096×2160p@60 |
| Maximum Output | Cat.5e/6/7 VGA |
4096×2160p@60 1920×1200p@60RB |
| Audio | ||
| Input Signal Types | HDMI, Unbalanced Stereo | |
| Output Signal Types | Unbalanced Stereo | |
| Digital Formats | HDMI 2CH LPCM, 8CH LPCM, Standard Bitstream | |
| CONNECTIONS | ||
| Input Port | 1 HDMI (Type-A) 1 Unbalanced Stereo (3.5mm) |
|
| Output Port | 1 Cat.5e/6/7 (RJ45) 1 Unbalanced Stereo (3.5mm) 1 VGA |
|
| Control I/O | 1 USB Type-B 1 IR Extender [3.5mm] 1 IR Blaster [3.5mm] 1 RS232 |
|
| MECHANICAL SPECIFICATIONS | ||
| Housing Construction | Metal (Steel) | |
| Device Dimension (W x H x D) | 231.5mm×25mm×108mm (W×H×D) [Case Only] 231.5mm×25mm×120mm (W×H×D) [All Inclusive] |
|
| Weight | 660g | |
| Power Supply | PoE or 5V/2.6A DC (US/EU standards, CE/FCC/UL certified) | |
| Power Consumption | 7.15W | |
| Operating Temperature | 0˚C – 50˚C/32˚F – 122˚F | |
| Storage Temperature | -20˚C – 60˚C/-4˚F – 140˚F | |
| Relative Humidity | 20 – 90% RH (Non-condensing) | |
| ESD Protection | Human Body Model: ±12kV (Air Discharge) ±8kV (Contact Discharge) |
|